replace sequence config files for sequences that were replaced in CTC

cfg/per-sequence/CampfireParty.cfg → cfg/per-sequence/Campfire.cfg

 #======== File I/O ===============
-InputFile                     : CampfireParty_3840x2160_30fps_10bit_420_jvet.yuv
+InputFile                     : Campfire_3840x2160_30fps_10bit_420_bt709_videoRange.yuv
 InputBitDepth                 : 10          # Input bitdepth
 InputChromaFormat             : 420         # Ratio of luminance to chrominance samples
 FrameRate                     : 30          # Frame Rate per second
@@ -8,4 +8,4 @@ SourceWidth                   : 3840        # Input  frame width
 SourceHeight                  : 2160        # Input  frame height
 FramesToBeEncoded             : 300         # Number of frames to be coded
 
-Level                         : 5
+Level                         : 5.1

cfg/per-sequence/DaylightRoad.cfg → cfg/per-sequence/DaylightRoad2.cfg

 #======== File I/O ===============
-InputFile                     : DaylightRoad_3840x2160_60fps_10bit_420_jvet.yuv
+InputFile                     : DaylightRoad2_3840x2160_60fps_10bit_420.yuv
 InputBitDepth                 : 10          # Input bitdepth
 InputChromaFormat             : 420         # Ratio of luminance to chrominance samples
 FrameRate                     : 60          # Frame Rate per second

cfg/per-sequence/Rollercoaster.cfg → cfg/per-sequence/Rollercoaster2.cfg

 #======== File I/O ===============
-InputFile                     : RollerCoaster_4096x2160_60fps_10bit_420_jvet.yuv
+InputFile                     : RollerCoaster2_3840x2160_60fps_10bit_420.yuv
 InputBitDepth                 : 10          # Input bitdepth
 InputChromaFormat             : 420         # Ratio of luminance to chrominance samples
 FrameRate                     : 60          # Frame Rate per second
 FrameSkip                     : 0           # Number of frames to be skipped in input
-SourceWidth                   : 4096        # Input  frame width
+SourceWidth                   : 3840        # Input  frame width
 SourceHeight                  : 2160        # Input  frame height
 FramesToBeEncoded             : 300         # Number of frames to be coded
 

cfg/per-sequence/Tango.cfg → cfg/per-sequence/Tango2.cfg

 #======== File I/O ===============
-InputFile                     : Tango_4096x2160_60fps_10bit_420_jvet.yuv
+InputFile                     : Tango2_3840x2160_60fps_10bit_420.yuv
 InputBitDepth                 : 10          # Input bitdepth
 InputChromaFormat             : 420         # Ratio of luminance to chrominance samples
 FrameRate                     : 60          # Frame Rate per second
 FrameSkip                     : 0           # Number of frames to be skipped in input
-SourceWidth                   : 4096        # Input  frame width
+SourceWidth                   : 3840        # Input  frame width
 SourceHeight                  : 2160        # Input  frame height
 FramesToBeEncoded             : 294         # Number of frames to be coded
 

cfg/per-sequence/ToddlerFountain.cfg → cfg/per-sequence/ToddlerFountain2.cfg

 #======== File I/O ===============
-InputFile                     : ToddlerFountain_4096x2160_60fps_10bit_420_jvet.yuv
+InputFile                     : ToddlerFountain2_3840x2160_60fps_10bit_420.yuv
 InputBitDepth                 : 10          # Input bitdepth
 InputChromaFormat             : 420         # Ratio of luminance to chrominance samples
 FrameRate                     : 60          # Frame Rate per second
 FrameSkip                     : 0           # Number of frames to be skipped in input
-SourceWidth                   : 4096        # Input  frame width
+SourceWidth                   : 3840        # Input  frame width
 SourceHeight                  : 2160        # Input  frame height
 FramesToBeEncoded             : 300         # Number of frames to be coded