Forked from
jvet / VVCSoftware_VTM
1516 commits behind the upstream repository.
-
Frank Bossen authoredFrank Bossen authored
AnnexBread.cpp 7.90 KiB
/* The copyright in this software is being made available under the BSD
* License, included below. This software may be subject to other third party
* and contributor rights, including patent rights, and no such rights are
* granted under this license.
*
* Copyright (c) 2010-2022, ITU/ISO/IEC
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* * Neither the name of the ITU/ISO/IEC nor the names of its contributors may
* be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
\file AnnexBread.cpp
\brief reading functions for Annex B byte streams
*/
#include <stdint.h>
#include <vector>
#include "AnnexBread.h"
#if RExt__DECODER_DEBUG_BIT_STATISTICS
#include "CommonLib/CodingStatistics.h"
#endif
using namespace std;
//! \ingroup DecoderLib
//! \{
/**
* Parse an AVC AnnexB Bytestream bs to extract a single nalUnit
* while accumulating bytestream statistics into stats.
*
* If EOF occurs while trying to extract a NALunit, an exception
* of std::ios_base::failure is thrown. The contsnts of stats will
* be correct at this point.
*/
static void
_byteStreamNALUnit(
InputByteStream& bs,
vector<uint8_t>& nalUnit,
AnnexBStats& stats)
{
/* At the beginning of the decoding process, the decoder initialises its
* current position in the byte stream to the beginning of the byte stream.
* It then extracts and discards each leading_zero_8bits syntax element (if
* present), moving the current position in the byte stream forward one
* byte at a time, until the current position in the byte stream is such
* that the next four bytes in the bitstream form the four-byte sequence
* 0x00000001.
*/
#if RExt__DECODER_DEBUG_BIT_STATISTICS
CodingStatistics::SStat &statBits=CodingStatistics::GetStatisticEP(STATS__NAL_UNIT_PACKING);
#endif
while ((bs.eofBeforeNBytes(24/8) || bs.peekBytes(24/8) != 0x000001)
&& (bs.eofBeforeNBytes(32/8) || bs.peekBytes(32/8) != 0x00000001))
{
uint8_t leading_zero_8bits = bs.readByte();
#if RExt__DECODER_DEBUG_BIT_STATISTICS
#if EPBINCOUNT_FIX
statBits.bits+=8;
#else
statBits.bits+=8; statBits.count++;
#endif
#endif
if(leading_zero_8bits != 0) { THROW( "Leading zero bits not zero" ); }
stats.m_numLeadingZero8BitsBytes++;
}
/* 1. When the next four bytes in the bitstream form the four-byte sequence
* 0x00000001, the next byte in the byte stream (which is a zero_byte
* syntax element) is extracted and discarded and the current position in
* the byte stream is set equal to the position of the byte following this
* discarded byte.
*/
/* NB, the previous step guarantees this will succeed -- if EOF was
* encountered, an exception will stop execution getting this far */
if (bs.peekBytes(24/8) != 0x000001)
{
uint8_t zero_byte = bs.readByte();
#if RExt__DECODER_DEBUG_BIT_STATISTICS
#if EPBINCOUNT_FIX
statBits.bits+=8;
#else
statBits.bits+=8; statBits.count++;
#endif
#endif
CHECK( zero_byte != 0, "Zero byte not '0'" );
stats.m_numZeroByteBytes++;
}
/* 2. The next three-byte sequence in the byte stream (which is a
* start_code_prefix_one_3bytes) is extracted and discarded and the current
* position in the byte stream is set equal to the position of the byte
* following this three-byte sequence.
*/
/* NB, (1) guarantees that the next three bytes are 0x00 00 01 */
uint32_t start_code_prefix_one_3bytes = bs.readBytes(24/8);
#if RExt__DECODER_DEBUG_BIT_STATISTICS
#if EPBINCOUNT_FIX
statBits.bits+=24;
#else
statBits.bits+=24; statBits.count+=3;
#endif
#endif
if (start_code_prefix_one_3bytes != 0x000001)
{
THROW("Invalid code prefix");
}
stats.m_numStartCodePrefixBytes += 3;
/* 3. NumBytesInNALunit is set equal to the number of bytes starting with
* the byte at the current position in the byte stream up to and including
* the last byte that precedes the location of any of the following
* conditions:
* a. A subsequent byte-aligned three-byte sequence equal to 0x000000, or
* b. A subsequent byte-aligned three-byte sequence equal to 0x000001, or
* c. The end of the byte stream, as determined by unspecified means.
*/
/* 4. NumBytesInNALunit bytes are removed from the bitstream and the
* current position in the byte stream is advanced by NumBytesInNALunit
* bytes. This sequence of bytes is nal_unit( NumBytesInNALunit ) and is
* decoded using the NAL unit decoding process
*/
/* NB, (unsigned)x > 2 implies n!=0 && n!=1 */
#if RExt__DECODER_DEBUG_BIT_STATISTICS
CodingStatistics::SStat &bodyStats=CodingStatistics::GetStatisticEP(STATS__NAL_UNIT_TOTAL_BODY);
#endif
while (bs.eofBeforeNBytes(24/8) || bs.peekBytes(24/8) > 2)
{
#if RExt__DECODER_DEBUG_BIT_STATISTICS
uint8_t thebyte=bs.readByte();bodyStats.bits+=8;bodyStats.count++;
nalUnit.push_back(thebyte);
#else
nalUnit.push_back(bs.readByte());
#endif
}
/* 5. When the current position in the byte stream is:
* - not at the end of the byte stream (as determined by unspecified means)
* - and the next bytes in the byte stream do not start with a three-byte
* sequence equal to 0x000001
* - and the next bytes in the byte stream do not start with a four byte
* sequence equal to 0x00000001,
* the decoder extracts and discards each trailing_zero_8bits syntax
* element, moving the current position in the byte stream forward one byte
* at a time, until the current position in the byte stream is such that:
* - the next bytes in the byte stream form the four-byte sequence
* 0x00000001 or
* - the end of the byte stream has been encountered (as determined by
* unspecified means).
*/
/* NB, (3) guarantees there are at least three bytes available or none */
while ((bs.eofBeforeNBytes(24/8) || bs.peekBytes(24/8) != 0x000001)
&& (bs.eofBeforeNBytes(32/8) || bs.peekBytes(32/8) != 0x00000001))
{
uint8_t trailing_zero_8bits = bs.readByte();
#if RExt__DECODER_DEBUG_BIT_STATISTICS
#if EPBINCOUNT_FIX
statBits.bits+=8;
#else
statBits.bits+=8; statBits.count++;
#endif
#endif
CHECK( trailing_zero_8bits != 0, "Trailing zero bits not '0'" );
stats.m_numTrailingZero8BitsBytes++;
}
}
/**
* Parse an AVC AnnexB Bytestream bs to extract a single nalUnit
* while accumulating bytestream statistics into stats.
*
* Returns false if EOF was reached (NB, nalunit data may be valid),
* otherwise true.
*/
bool
byteStreamNALUnit(
InputByteStream& bs,
vector<uint8_t>& nalUnit,
AnnexBStats& stats)
{
bool eof = false;
try
{
_byteStreamNALUnit(bs, nalUnit, stats);
}
catch (...)
{
eof = true;
}
stats.m_numBytesInNALUnit = uint32_t(nalUnit.size());
return eof;
}
//! \}